586,058 active members*
3,388 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tormach Personal CNC Mill > Tormach PathPilot™ > Problem with Tormach USB recovery stick (1100 s3)

Thread: Problem with Tormach USB recovery stick (1100 s3)

Results 1 to 3 of 3
  1. 04-16-2022, 07:54 AM #1
    Clive S
    Clive S is offline Registered
    Join Date
    May 2013
    Posts
    49

    Problem with Tormach USB recovery stick (1100 s3)

    Ok my hard drive went down I have the USB from Torrmach and and flashed another drive with it.

    The problem is that when it it booting it pops and error say something like "check the ethernet cable between the pc and controller.

    My machine is using a mesa 5i25 connected to the controller.

    How can I get round this issue ?
    Reply With Quote Reply With Quote
  2. 04-16-2022, 09:31 AM #2
    Clive S
    Clive S is offline Registered
    Join Date
    May 2013
    Posts
    49

    Re: Problem with Tormach USB recovery stick (1100 s3)

    Click image for larger version.  Name: IMG_20220416_092317.jpg  Views: 0  Size: 91.1 KB  ID: 478814
    Reply With Quote Reply With Quote
  3. 04-16-2022, 02:31 PM #3
    Clive S
    Clive S is offline Registered
    Join Date
    May 2013
    Posts
    49

    Re: Problem with Tormach USB recovery stick (1100 s3)

    (Solved)

    I was using the Tormach USB to flash another drive in a different PC to that of the PC on the Tormach
    when I flashed with the USB with the drive in the Tormach PC it found the 5i25
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. tormach pcnc 1100 atc problem
    By daliborb in forum Tormach Personal CNC Mill
    Replies: 3
    Last Post: 06-10-2021, 06:30 AM
  2. USB Stick issues
    By MFchief in forum Tormach Personal CNC Mill
    Replies: 10
    Last Post: 03-14-2020, 08:13 PM
  3. USB stick Help
    By brianfagan in forum Haas Mills
    Replies: 12
    Last Post: 10-09-2012, 05:19 PM
  4. USB stick question
    By 13brv3 in forum LinuxCNC (formerly EMC2)
    Replies: 12
    Last Post: 07-07-2011, 09:51 AM
  5. USB Stick as HDD
    By babinda01 in forum LinuxCNC (formerly EMC2)
    Replies: 7
    Last Post: 09-17-2007, 03:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules