Shelby you can prove it to yourself, just take a resistor from say 1000 ohms up to 4.7K and connect it to the direction signal and other end to 5 volts
It will work
Results 1 to 20 of 78
Threaded View
-
04-22-2022, 11:29 PM #15
Registered
- Join Date
- Jun 2005
- Posts
- 1730
Re: mach3 x and y axis only moe in one direction
Reply With QuoteSimilar Threads
-
Mach3 Direction Problem - Can someone help me please
By davidhigginbottom in forum Mach Software (ArtSoft software)Replies: 2Last Post: 07-05-2020, 05:35 PM -
mach3 BOB spindel direction
By Vik in forum Spindles / VFDReplies: 3Last Post: 11-06-2018, 07:19 PM -
Mach3 is moving in the opposite direction
By maly-miller in forum Mach MillReplies: 3Last Post: 03-04-2014, 03:00 PM -
Erratic direction changes in mach3 lathe
By GF12 in forum Mach LatheReplies: 0Last Post: 02-17-2013, 05:29 PM -
A3977/Mach3 Direction changes randomly
By kiltjim in forum Open Source Controller BoardsReplies: 9Last Post: 12-09-2007, 03:04 AM
Tags for this Thread
Posting Permissions
