Hello everyone
To Begin with the chinese CNC
It has a pair of heads
And my issue is in those heads
• The head moves randomly meaning it starts drilling with or without giving them the command to do that . ( E,g often starts drilling even before giving it the command & sometime when i give it command it begins drilling in random spots inaccurately ).
I tried to turn off the machine software (ncstudio), that whole thing all of sudden stops.
But the heads unexplained shakiness and random movement still happens even if that head is turned off, a slight movements with weird engine sounds ).
• i had no clue what to do , I checked all the wires ,i even removed and reinstalled the system and the software of the machine but the issue still there.
• To add to all of this it has gotten worse it cause in axes problem .
• The y and z axes are fine.. the x axis is messed up.
the x+ move in the x- direction as shown on the footage i shared with you