[jlmccuan]

I am looking for a new or lightly used/rebuilt spindle motor for my VMC. It is for a belt drive spindle. I would go for a VFD rated motor or AC servo and drive that would interface with Mach3. I need 3.7Kw or 5HP or more and 8000rpm or more. Surely there is a company out there making these or someone who has one.

Thanks
Jim McCuan

[mactec54]

I am looking for a new or lightly used/rebuilt spindle motor for my VMC. It is for a belt drive spindle. I would go for a VFD rated motor or AC servo and drive that would interface with Mach3. I need 3.7Kw or 5HP or more and 8000rpm or more. Surely there is a company out there making these or someone who has one.

Thanks
Jim McCuan

There are a few people that have been using these spindle motors they seem to work well there are other manufactures that make these spindle motors also, you need to buy the Drive also with the motor High Torque Servo Spindle Motor For CNC Controller System 5.5KW Max Speed 8000RPM

You can also use a washdown AC 3Phase motor that will give you 6000RPM