HI,
I need to make 5x equally spaced holes along a 8.21" R spaced at 7.78°. Stock is 6.63 "x 3.5" (Haas vertical Mill)
The first hole is located at X1.1 Y-0.73. (Part zero is upper lefter corner of part). The problem is, with G71 the reference point for the arc is the center of the bolt circle, which would in outer space relative to the part.
Is there a way I can manually program using the first hole as the reference? So I start off at x1.10 Y -0.73 and the I8.21 J7.78?