586,036 active members*
3,593 visitors online*
Register for free
Login

Thread: Gantry and carriage doesn't work

Results 1 to 11 of 11

Threaded View

  1. 05-25-2022, 06:08 AM #1
    Prairiehawk
    Prairiehawk is offline
    Join Date
    May 2022
    Posts
    5

    Gantry and carriage doesn't work

    Hi All
    I bought a Mastercam Z7 with the A2MC upgrade. A bit of an issue getting the router to operate. The computer initializes and the spindle will start/warm up, but the gantry and carriage will not move, either manually or in a job. I get an error message (E103) when I do a function F12. The sensors all work when tested, all fuses are ok. Power is getting to the power distribution board that feeds the servo controllers in the control box. The servo controllers all have a red light that periodically flashes on them. Does anyone know what I could check to see what the issue may be?
    Any insight would be much appreciated.
    Thanks
    Attached Thumbnails Attached Thumbnails Control Box.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Graziano SAG 210 Lead screw turns But carriage Doesn't feed.
    By big_mak in forum Turning Machines
    Replies: 0
    Last Post: 03-24-2021, 03:42 AM
  2. Software to transfer your gantry carriage plate design to vector
    By MajorTendonitis in forum DIY CNC Router Table Machines
    Replies: 17
    Last Post: 06-19-2017, 03:33 AM
  3. Linear Carriage/Gantry Help
    By AirportDrunk in forum Avid CNC
    Replies: 2
    Last Post: 05-30-2014, 03:38 AM
  4. PRO Kit. Gantry Carriage Assembly does not fit.
    By Gunni in forum Avid CNC
    Replies: 5
    Last Post: 04-19-2014, 05:17 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules