I just started programming a Fortune NP16 with the Fanuc 0i-TF+ control. I would like to be able to have an initial large peck distance say 4 x diameter and then reduce it by 1x diameter to a minimum peck of .5 x dia. on a Haas it would look like this;
G83 Z-.625, I0.16 J0.040 K.020 R.1 F0.0012
Does anyone know if there is a format to make the G83 drill cycle on my control do the same thing?
Results 1 to 5 of 5
Threaded View
-
06-10-2022, 01:54 AM #1
Registered
- Join Date
- Sep 2007
- Posts
- 1
Fanuc 0i-TF+ G83 deep hole drill cycle can I, J, and K be used like on Haas controls?
Reply With QuoteSimilar Threads
-
DMG DMU Mono Block 75 deep hole drill cycle
By dfearnow in forum Deckel, Maho, Aciera, Abene MillsReplies: 1Last Post: 07-16-2020, 07:11 PM -
SinumeriK Drill Cycle G83
By ICESNIFFER in forum SIEMENS -> GENERALReplies: 4Last Post: 03-13-2014, 03:17 AM -
Need help using G83 peck drill cycle
By Lene Madsen in forum EdgeCamReplies: 8Last Post: 09-07-2012, 12:47 PM -
trying to ues a G83 drill cycle
By firekoe in forum FanucReplies: 14Last Post: 04-27-2010, 04:45 PM -
G83 deep hole drilling
By mike852 in forum Community Club HouseReplies: 2Last Post: 02-08-2010, 07:34 PM
Tags for this Thread
Posting Permissions
