Currently trying to pull data from a 35i Model B using Fanuc Focas. I've looked through a bunch of parameters but can't seem to find one that specifies the number of active paths. Some machines are multipath and others are only using a single path. Is there a parameter or diagnostic that will tell me the machine condition?
Results 1 to 2 of 2
-
05-24-2023, 07:39 PM #1
- Join Date
- May 2023
- Posts
- 1
How to tell number of paths being used with a parameter.
-
05-24-2023, 08:49 PM #2
Member
- Join Date
- Aug 2019
- Posts
- 145
Re: How to tell number of paths being used with a parameter.
Try looking at cnc_sysinfo_ex as a start. You may need to combine data from a few different calls depending on exactly what you are looking for.
Reply With QuoteSimilar Threads
-
Mori Seiki SL-15MC Parameter Serial number 504
By kabdelwahid in forum Mori Seiki MachinesReplies: 0Last Post: 10-18-2022, 03:57 PM -
Bridgeport Interact 720 4 th Axis parameter number etc
By beemergb in forum Bridgeport MachinesReplies: 0Last Post: 05-12-2022, 01:49 PM -
Location number under the offset parameter in 802D sl
By Sturmer in forum SIEMENS -> GENERALReplies: 0Last Post: 09-01-2015, 11:03 AM -
0i parameter number for look-ahead feature
By sinha_nsit in forum FanucReplies: 1Last Post: 03-02-2009, 04:26 PM -
I need a certain Parameter number (Fanuc OT)
By M@T in forum FanucReplies: 1Last Post: 08-22-2007, 06:39 PM
Tags for this Thread
Posting Permissions
