OK... I feel like I've changed this in the past, but for the life of me, I can't find the setting, or parameter...

How do I set the default RPMs I get on the spindle when I hit the CW or CCW button?

This is on a Haas VF2ss with the pre-NGC control.

Not something I use much... I hit it today while trying to check the coolant spray on an abrasive brush I want to try... Well, the spindle ran up all the way to 12k (I think), and the brush turned in to a grenade before my brain realized what was happening since it is only rated at 2500 rpm. No chance to hit the stop before the destruction. No damage to the machine, just a hit to my pride...