Can anyone provide me the P9810, P9811, P9812, P9823 and other Renishaw's subroutines used for probing on MAZATROL M- PLUS series Cause an employed erase everything. thanks
email:
[email protected]
Can anyone provide me the P9810, P9811, P9812, P9823 and other Renishaw's subroutines used for probing on MAZATROL M- PLUS series Cause an employed erase everything. thanks
email:
[email protected]
Is it a standard Meldas/Fanuc macro, or is it specific to Mazak? I've never completely "gotten" exactly how the Mazak controls are configured. They seem to have Mitsubishi Meldas hardware, but is the firmware loaded into the Meldas control something that was developed by Mazak, is it just a "skin" and all of the underlying code is still Mitsubishi Meldas? If the latter is the case, then you probably can use Meldas macros. Otherwise, you'll need to find Mazak macros.