Hi I have a home made CNC Table Running with Mach3 and I added a Laser to it. I have the problem that the laser turns on 1 to 2 seconds before the laser starts to move. leaving a burn dot at the start of every burn.Any suggestions would be truly appreciated.
Results 1 to 3 of 3
-
09-26-2022, 03:53 AM #1
Member
- Join Date
- Sep 2022
- Posts
- 1
Laser Turns on 1 to 2 seconds before Moving
-
09-26-2022, 06:35 PM #2
Registered
- Join Date
- Nov 2008
- Posts
- 643
Re: Laser Turns on 1 to 2 seconds before Moving
What commands are you using to turn the laser on?
Sent from my iPhone using Tapatalk
-
09-27-2022, 02:26 AM #3
Member
- Join Date
- Nov 2013
- Posts
- 4375
Re: Laser Turns on 1 to 2 seconds before Moving
Hi,
Mach3 does have a couple of commands that turns the laser on or off exactly at the moment the axis starts (or stops) moving. Note that many Chinese external motion controllers do not
support those Mach3 specific commands.
Craig
Reply With Quote
Posting Permissions
