Hi all, I have a customer who crashed their DMS 5 axis router and to get the machine off the part they loosened one side of the gantry. The machine doesn’t use dual homing to self square though the machine is so stiff it probably couldn’t do anything anyway.

I was going to check it with my ML10 but it turns out I need to order new optics to measure angles. DMS seems to be struggling with their support team so we are kind of fending for ourselves.

My current idea is to mount my 12” machinist square to the tables pre drilled mounting holes. Though on this machine the aluminum table is mounted in the floor, separate from the gantry. I’m not 100% sure it is perfectly square with the machine.

Ideas welcome.