I have a robodrill w/APC and am trying to run a program
%
O0001 (CHANGE PALLET CALL PROGRAM)
(SET PROG NO FOR EACH PALLET IN QUICK NC)
M65
M98 P#990
M01
M99
%
this runs, but doesn't repeat (i am expecting it to repeat forever).
I also tried
%
O0001 (CHANGE PALLET CALL PROGRAM)
(SET PROG NO FOR EACH PALLET IN QUICK NC)
N1
M65
M98 P#990
M01
GOTO1
M99
%
but, to me at least shockingly it doesnt repeat
any robodrill / fanuc guys out there know why this might not happen?
my next move is to call this program as a subprogram using M98, but the factory pallet call program from kawatatec is as shown above, so M99 should be working on this machine, but it just isn't.