[EmeraldIsleforg]

I asked this in my other post, but I figured I'd make a new post just for this. My Southbend Magnaturn 1218 needs code where X is the radius. I made sure line 1249 is set to r, but it still outputs as diameter. I looked in Settings, Current Document and changed it to lathe and Radius mode, but that hasn't helped either. Is there something else I need to change somewhere? I've searched everywhere and haven't found anything.

Thanks for any help.

Mike

[deadlykitten]

hy if you wish i help you with a custom application, that will edit automatically your files, in background

it requires 0 intervention; it detects your original file, then edits it/ kindly

[EmeraldIsleforg]

Thanks, but I'd rather the software I paid for worked correctly.

[EmeraldIsleforg]

OK, got some help and found out that 6005 needs to be changed from 2.0 to 1.0 when you change 1249 to r.