Don't tell me that. LOL. My original size was 20"x12"x9". Since I am not running a spindle/inverter I figured this would be plenty of room. Fingers crossed!Originally Posted by Al_The_Man
There is a inescapable rule, that any enclosure or cabinet purchased ends up being at least 5% too small !
Results 1 to 20 of 77
Threaded View
-
11-06-2022, 03:38 AM #18
Member
- Join Date
- Dec 2018
- Posts
- 112
Re: Need some guidance on which wire I need to use.
Reply With QuoteSimilar Threads
-
Mitsubishi FX-10 1997, Problem with wire detection before the wire chopper.
By Jeff247 in forum EDM Discussion General TopicsReplies: 0Last Post: 10-29-2019, 03:26 PM -
Stepper tap wire and spindle ground wire connection
By cncuser1 in forum Gecko DrivesReplies: 0Last Post: 02-16-2019, 02:53 AM -
French cleat wire caddy (cleaning up your spools of colored wire)
By davy182 in forum VideosReplies: 0Last Post: 02-08-2017, 02:24 PM -
USER MANUAL SODICK MARK X or XI wire EDM, and wire breakage
By stan34 in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 01-14-2015, 03:56 PM -
power supply size? for multi wire (total 250 inches of wire)
By DanOSB in forum CNC Wire Foam Cutter MachinesReplies: 5Last Post: 03-02-2009, 11:34 PM
Tags for this Thread
Posting Permissions
