[moso]

Looking for a Hardinge/Fanuc service engineer to sort out Main CPU board fault.
Machine will not boot, change the main board and same thing happened after 5 mins of power up.
had no chance to input parameters, I have now changed the power board, but have no main board to replace.
Get 4 green leds on top row (main board)
1 red led in bottom row.
Generic system Halt

[::Andy::]

Looking for a Hardinge/Fanuc service engineer to sort out Main CPU board fault.
Machine will not boot, change the main board and same thing happened after 5 mins of power up.
had no chance to input parameters, I have now changed the power board, but have no main board to replace.
Get 4 green leds on top row (main board)
1 red led in bottom row.
Generic system Halt

Don't know if you have got this sorted since, but would highly recommend you get in touch with DNC Electronics near Swindon. Their tech people should be able to help you diagnose whats going on with your machine and either offer testing and inspection, or replacement boards.