Direct bitmap to model conversion method
To anyone interested really...
For some time now I've been working on a method to equate to what the likes of visual scuplture can do by way of generating 3D vector models from raster clipart/images. One of the main goals was that the software used must be FREE or very inexpensive.
I'm happy to say I have a fully working NO-COST solution.. requiring NO modelling skills and MINIMAL knowledge and experience. As close to a load and Code solution as you will get for FREE.
The method is very successful across a wide range of source material, take a look at the pics below and see for yourself.. The Pvw series of images are cutting previews from Cut3D software.
Creating the models takes 10 mins or less and requires nothing more serious than adjusting some value sliders.. NO modelling, NO geometry tweaking, NOTHING. ALL software used is FREE.
I 'm thinking of charging a small amount for the ebook of the NEW method, to justify the time it takes to create. If you want a taste of my cooking tryout the free tutorial indicated in my sig. The Fairy and teddy models were initially made using this free method... but did take some time..
If anyone is interested in purchasing the NEW tutorial could you please let me know here or via p.m. If I get enough interest I'll get to work.. if not I'll know the demand is not there... WILL NOT be expensive.. looking at keeping the cost to about 10 GBP at most.
TTFN
What one man can do another man can do..
BitMaps to Models, 3D2Relief, tutorials and FREE CNC Software http://cnc4free.org