[Sazabi]

Good day everyone.

I have an issue with diy hand wheel. I'm using 5v 4 pin hand wheel and few buttons for axis/speed control, pulled to ground to enable option. I can see wheel responses, axis and speed switches behavior when I get in RNR plugin config. Buy mach3 doesnt react on any of those. MPG1 enabled it mach3 settings.
So it definitely some settings in mach3 I am missing. But I cant find out which one.
Any help would be highly appreciated

[cebaldocchi]

Using a RnR EcoMotion Card Board I make that.

A) Plug the cables from the MPG to the card board.

B) You Must use a Specific Plugin: [BSMotion-v2.dll]

C) You Must Allow [MPG #1] on screen: Config >> Port and Pins >> [Encoder / MPGs].

D) You Must Allow the Digital Inputs on screen: Config >> Port and Pins >> [Input Signals]
* [OEM TRIG #1] --- Port #3 --- Pin Number 5
* [OEM TRIG #2] --- Port #3 --- Pin Number 6
* [OEM TRIG #3] --- Port #3 --- Pin Number 7
* [OEM TRIG #4] --- Port #3 --- Pin Number 8


E) You Must Allow the OEM Codes on screen: Config >> [System HotKeys]
* [Trigger #1] ---> OEM Code 185
* [Trigger #2] ---> OEM Code 186
* [Trigger #3] ---> OEM Code 187
* [Trigger #4] ---> OEM Code 188

* [Trigger #1] ---> OEM Code 259
* [Trigger #2] ---> OEM Code 260
* [Trigger #3] ---> OEM Code 261
* [Trigger #4] ---> OEM Code 262

http://www.metalmadri.com.br/downloads/mpg-video.mp4