Hi Everyone,
I have an issue with the actual pot number not matching the pot number in the control. (Fanuc 16i-MB) I have been working thru the manuals but have not found a clear procedure on how to reset this. The machine has just been moved to our location and we are getting it setup. See attached pictures.
Any help is greatly appreciated.
Thanks!
K
Results 1 to 10 of 10
Threaded View
-
01-16-2023, 07:52 PM #1
Registered
- Join Date
- Jan 2014
- Posts
- 10
Pot number in magazine not matching pot number in control
Reply With QuoteSimilar Threads
-
Okuma MA-500H-II ATC Magazine 16894 Pot remove horizontal position is not completed
By hutch07 in forum OkumaReplies: 1Last Post: 05-31-2022, 12:37 PM -
Remote Pot or Mach speed control
By revwarguy in forum Spindles / VFDReplies: 1Last Post: 04-22-2015, 04:02 PM -
Fanuc Oi-md Pot vs Tool Number
By muddobber76 in forum FanucReplies: 0Last Post: 09-26-2012, 09:45 PM -
computer control machine pot
By Karl_T in forum CNC Machine Related ElectronicsReplies: 8Last Post: 06-20-2009, 06:09 PM -
X2 Speed Control Pot. Voltages
By maxboostbusa in forum Benchtop MachinesReplies: 15Last Post: 04-27-2008, 04:15 PM
Tags for this Thread
Posting Permissions
