586,106 active members*
3,027 visitors online*
Register for free
Login

Thread: Materials and configurations

Results 1 to 2 of 2
  1. 09-23-2007, 06:59 PM #1
    nbgx3
    nbgx3 is offline Registered
    Join Date
    Sep 2007
    Posts
    4

    Wink Materials and configurations

    hello,
    i ufse the chinise cutter and engrave machine (RABBIT), in the manuel their is no informations about the speed and the power values for each material, like plexiglass that i use frequently, is any body have an information about this, or should i test one by one to get the optimal values,
    thanks for advance
    Reply With Quote Reply With Quote
  2. 09-23-2007, 10:10 PM #2
    lamicron
    lamicron is offline Registered
    Join Date
    Apr 2007
    Posts
    641
    There is a lot of info about it in the forum,
    An easy way is to cut one piece of the material (12mm or thicker) PUT 90% of power, and make some cuts from the border at different speeds, starting from 60 or 70mm/sec. then you can see the diferent deep of cut in each speed, that way you can get an idea in any material.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Where to buy materials?
    By Chevy-SS in forum Uncategorised MetalWorking Machines
    Replies: 14
    Last Post: 02-17-2023, 10:20 AM
  2. Importing Solidworks parts with configurations.
    By moldmker in forum BobCad-Cam
    Replies: 1
    Last Post: 02-04-2007, 11:41 PM
  3. materials
    By ironDigit in forum Material Machining Solutions
    Replies: 7
    Last Post: 06-24-2006, 02:43 PM
  4. please tell me the wire configurations of this
    By shaiqbashir in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 04-12-2006, 09:41 PM
  5. materials
    By broncosis in forum DIY CNC Router Table Machines
    Replies: 27
    Last Post: 06-13-2004, 01:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules