the way my cnc table is designed the x and y axis both go in the positive direction when i tell the program (turbocnc) to jog in the positive + dricetion.
my problem is when i tell the z axis to jog in the positive direction ( i have the motor mounted on top of the axis )in the program, it actually goes in the opposite direction on my cnc table.
by default the motors turn clockwise when told to jog in the + direction.
how do i set the parameters in turbocnc so that the motor turns counter clockwise when it is told to jog in the positive direction instead of clockwise?
i am using a xylotex 3 axis driver and the motors that came with it.