Dear all
Need to know the name of free software to produce the files in vector format for the 2 pisc attached . :rainfro:
Thanks
Dear all
Need to know the name of free software to produce the files in vector format for the 2 pisc attached . :rainfro:
Thanks
the only two that i know of is Vcarve (or PhotoVcarve) and ArtCAM... One of them has free demo i believe, but they are not free...
http://groups.yahoo.com/group/CNC_4_...guid=324898734
Go to this link and join, then contact the owner. He goes by yohudi here on the zone and if you do a search you will find he has developed a tutorial $20 us to do this with free software.
Mike
ps found the link here...
http://www.cnczone.com/forums/showth...942#post347942
No greater love can a man have than this, that he give his life for a friend.