[metx]

Hello,
I have acquired above mentioned machine and do not have machine specific operating manual. I contacted G&L which took over W&S and had no luck. They have replacement parts but no manuals.The machine is a 90' model and has a tool setting probe. I have no idea how to operate this machine. If someone can point me in the right direction it would be greatly appreciated.
I also need a 10TF manual for the control part of it. The only other Fanuc control we have is on a Tsugami and it is a 6T.
TIA,
Keith

[RRL]

I dug though an old list and found a name of a company that is owned by 2 former W&S service engineers. May be they can help you out.

K & C Services Inc
5240 Belmont Road
Downers Grove, IL 60515

(630) 493-9790

I hope this helps,

RRL

[metx]

I dug though an old list and found a name of a company that is owned by 2 former W&S service engineers. May be they can help you out.

K & C Services Inc
5240 Belmont Road
Downers Grove, IL 60515

(630) 493-9790

I hope this helps,

RRL

Thanks