I found a site that has soon information on making a Control Box Using a Axxus Technologies Parallel Port Intertface, http://home.woh.rr.com/cncrouter/control.htm .
You woun't happen to know how to countack the guy ?
I found a site that has soon information on making a Control Box Using a Axxus Technologies Parallel Port Intertface, http://home.woh.rr.com/cncrouter/control.htm .
You woun't happen to know how to countack the guy ?
the links on his site seem not to be active
Do you want to contact Axxus? If so, here http://members.shaw.ca/axxus/ If you want to contact the guy with the web site, can't help ya there.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)