Hi All,
I have 3 old xerox Sanyo Denki motors I think two are 140 or 170 and other is 180 OzIn.
I would be doing microstepping most of times, no full throttle. What do you say can these be used with Joe's model? Or I have to reduce size of Joe's say 4'x4' or 3'X1.5'?
Other question I can't get 1/2" screw for such length of X Axis, I wonder if 3/4" or 1" with 8TPI can be used with these steppers?
Plz help
Thanks
P.K.