I've been using Bobcad for four years now with Mach2 and just decided to upgrade to Mach3. I've found that my many files created in Bobcam using Haas VF1 are not compatable with Mach3. Can anyone tell me what postprocessor they use with Mach3 and using Bobcad V21.
Thanks
Dennis
Thread: Bobcad for Mach3 post processors
Results 1 to 3 of 3
-
10-20-2007, 04:32 AM #1
Registered
- Join Date
- Mar 2005
- Posts
- 63
Bobcad for Mach3 post processors
-
10-22-2007, 11:29 PM #2
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
Try Here
http://www.bobcadsupport.com/posts/Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
-
10-28-2007, 03:16 PM #3
Registered
- Join Date
- Jul 2007
- Posts
- 29
Dennis,
I have a Tormach PCNC single tool bed type mill using Mach 3, I have BCC v21 and recently upgraded to BCC2007.
The post available for v21 worked fine with my machine. The link Toby put up should get you to the current post download.
Best, Dave
Reply With Quote
Similar Threads
-
Post Processors for Fadal
By sbarziza in forum CamWorksReplies: 0Last Post: 06-25-2007, 07:08 PM -
Mastercam post processors
By premierpatterns in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 11-24-2006, 01:19 PM -
V20 post processors
By doug6949 in forum BobCad-CamReplies: 5Last Post: 02-22-2005, 02:49 PM -
how do post processors work
By senor J. in forum Uncategorised CAM DiscussionReplies: 1Last Post: 10-23-2004, 04:01 AM -
post processors
By Turn Man in forum Uncategorised CAM DiscussionReplies: 4Last Post: 05-30-2004, 07:13 PM
Posting Permissions
