[Apples]

How do i erase a line in AutoCAD. i mean if i click on the line to erase just a piece of it say after a interscetion the whole line will erase not just a piece of it.

i have tried exploding the whole drawing but it will not let me explode them

What do i do now?

Apples

[CRFultz]

You could use "OSSnap" and then the" break" command..

[wjbzone]

Are you using the trim (tr) command? Select the line(s) you want to trim to, then click the portion you want to trim.
Bill

[Apples]

What do u mean use the "OSSnap". i know what the break command is. but if i want to erase. okay imagine a noughts and crosses game ie 2 lines parralell and 2 lines parralell and at 90degress to each other, if i want to erase just one of the lines of the square in the noughts and crosseshow do i do it?

All that it is doing is erasing the whole line. it is not stopping from erasing at the intersection but the whole line is being erased.

i know there is somthing that u can do to fix this. because i remember this happening at TAFE Colledge.

but now have forgoten how to do it.

[Mariss Freimanis]

trim command

Mariss

[cncadmin]

Or you can use the fillet comand with 0 radius.