Dear Friends,
We want to change the Mode Selector Switch and the Feed Rate Override Switch in our turning machine as they are really very bad.
Can any one help me in selection of the coded switch like real grey code etc.
Thanks and Regards,
CHANDRU
Thread: MODE SELECTOR SWITCH FOR 0i-T
Results 1 to 2 of 2
-
10-21-2007, 03:18 PM #1
Registered
- Join Date
- Jan 2007
- Posts
- 118
MODE SELECTOR SWITCH FOR 0i-T
-
10-21-2007, 04:46 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
The amount of positions and functions depend on the MTB, but they are generally Binary coded. You can see the code required by looking at the diagnostic page and noting the bit pattern as you turn the switch.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
Reply With Quote
Similar Threads
-
steppers VS Switch mode power
By CNCezee in forum Stepper Motors / DrivesReplies: 4Last Post: 10-10-2006, 07:25 PM -
Switch Mode Rectifier as power supply
By andy_ck87028 in forum Stepper Motors / DrivesReplies: 20Last Post: 04-30-2006, 04:17 AM -
Help with selector switch wiring issue (***actually a motor issue***)
By BEDFORD in forum Charter Oak Automation Support ForumReplies: 7Last Post: 04-07-2006, 09:19 PM -
Switch mode power supplies
By OCNC in forum CNC Machine Related ElectronicsReplies: 1Last Post: 12-01-2004, 05:44 PM -
320's and switch mode PSU
By kong in forum Gecko DrivesReplies: 7Last Post: 12-13-2003, 04:03 AM
Posting Permissions
