Hi everyone!
I own a 1999 Deckel Maho DMU60P (5axis table/table).
I have a problem with the table. Table moves freely 0.25mm, this also manifests itself during processing, most often during drilling, and I can also move it with my hands (I will attach a video).
At the same time, the axis of rotation and tilt work properly, but due to the backlash, it is almost impossible to process parts.
If someone faced this problem and could help, at least suggest in which direction to move. Perhaps someone has a technical manual.
Perhaps it is necessary to dismantle the table, if so, how to do it correctly without damaging anything.
I will be glad for any help.
Thank you in advance!