OK. Brought a second hand chinese laser cutter 80w 700x500 cut area with a Rudia RD6442S controller. First off, the Y axis did not move under command, then started to move, then stopped. I tried resetting to factory defaults. Now X is moving in the wrong direction to home so now I can't reset the machine to debug my first issue.
If anyone could get me on the path to debugging this that would be great. Just setting the axis to home to the correct corner of the machine would be a really good start. I'm currently using RDworks 8.01.60 The laser is unbranded.
Cheers.
Rob