I have a Biesse Rover 20 running on NC500. It is currently set up to run clamping only, no vaccum. When drilling the bits are only about 3mm above the panel while it moves into position, so they are hitting clamps.
Can anyone explain to me how to adjust the distance the bits move above the material? Can it be done?
Results 1 to 3 of 3
Threaded View
-
03-02-2023, 09:30 PM #1
Registered
- Join Date
- Jun 2017
- Posts
- 8
Biesse Rover 20 Drills hitting clamps
Reply With QuoteSimilar Threads
-
Biesse Rover S FT - NEED HELP PLEASE
By eoinquinn in forum BiesseReplies: 2Last Post: 08-07-2021, 07:18 PM -
Biesse Rover A FT -Nesting -Biesse Editor manual override of nesting algorithm
By Phyrrus in forum CNC Machining CentersReplies: 13Last Post: 10-21-2017, 06:02 PM -
Biesse Techno drills?
By Foxspeed in forum CNC Machining CentersReplies: 0Last Post: 11-28-2016, 01:04 PM -
ROVER 13S NC400 - DXF IMPORT - SIDE DRILLS DEPTH
By iborov in forum CNC Machining CentersReplies: 1Last Post: 04-03-2013, 08:03 AM -
Biesse Rover C
By Dogfart in forum CNC Machining CentersReplies: 0Last Post: 06-07-2009, 05:17 PM
Tags for this Thread
Posting Permissions
