Hi,
I have created machine sim for my horizontal milling machine and its working.
However, when I run simulation the machine is very small. A part 10"x10"x10" is gigantic compere to the machsim.
I don't know what I'm doing wrong,
Hi,
I have created machine sim for my horizontal milling machine and its working.
However, when I run simulation the machine is very small. A part 10"x10"x10" is gigantic compere to the machsim.
I don't know what I'm doing wrong,
Your machine not the correct scale .If its drawing in inches it needs to be drawn in millimeters.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .