Hello everyone,
I'm in the process (for the first time) of setting up my tool probe to probe for tool breakages after each operation.
I have a 4th axis fitted. i have programmed to start my parts at A0 working around in 90 degree increments having 2 parts at each position.
So the last operation for T1 is A270, and I then want to check T1.
The problem I'm getting is the machine is alarming out as A is not at zero. Is it possible to edit the macro to disable this? As I don't want to have to send the rotary back to A home every time.
I hope this is understandable.
Any solutions would be much appreciated.
Many Thanks
Leighton