[Dbl_Tap]

As I am rebuilding my Chinese CNC I found that even though it has been working for 10 years the 220v contactor was wired up wrong and I am having a hard time find the right drawing of how to do it.

I need pictures or I get lost on this stuff

I have a CJX2D1810 contactor, a 32amp fuse, a push button power button and the estop.

I have power coming in to 1 & 5 and leaving the contactor through 2 & 6. There are three wires leaving the control panel going to the power button and estop but I am not sure what to do at this point.

Any help would be greatly appreciated.

Attachment 490294
Attachment 490296