Hi,
New to the forum and new to 3d design. I have been using v carve for a while and it’s been great (2D only) with some use of the moulding tool. However I have come up against something I am not to sure on and would love some help. I am after creating a 3d shape.
I will attach a picture of what I am trying to achieve.
I am sure I will need to upgrade to aspire.
There are 3 measurements that I have.
I have the Birds Eye view of a rib which is sausage shaped
A few from the side which is a long shape that tapers at the ends and then one from the end which is a small lump shape.
Is there an easy way to achieve this? I have all the measurements needed.
I am looking to cut the shape out of my work piece not make a mould of it.

Huge thankyou in advance,
Adam