I have read that these come from the factory with the input set at 50Hz and I should change it to 60Hz before operating the spindle.
pd003 Main Frequency is set at 400, pd004 Base Frequency is set at 400 , are these input freq, should they be set to 60Hz?
The only other possibility I found was pd176. Inverter Frequency Standard , It's set to "0" (50Hz according to the manual) I changed it to "1" (60Hz) then press "set", the display goes to pd177, I go back to 176, press set to look at it and it's still set to "0"?