Hey all. Just bought the 2.2kW 80mm spindle with VFD. I already experimented with the 65mm 800W spindle with VFD before and it worked ok. this one doesn't. So I wired everything presumably correct. It would only work on super low RPM and if I increase RPM it would stop with an error on VFD.
See screenshots of my wiring attached. I have 14 gauge 4way cable: white wire on 1 and U, black on 2 and V, red on 3 and W, yellow is earth. And 14gauge power cable 110V.
My settings are the one they provide in their YouTube video:
P013 = 8
P005 = 400
P004 = 400
P002 = 1
P072 = 400
P144 = 3000