Mach3, Vectric 11, Gecko G540, ESS, both Y axis driven
I am adding homing and limit micro switches to my DIY CNC. Do I also need to set up the Soft Limits to have it slow down as it approaches the Limit and Home switches, or is the slow down feature available in the Homing and Limit switch setup?
Thanks
Results 1 to 2 of 2
Threaded View
-
03-30-2023, 02:37 PM #1
Member
- Join Date
- Sep 2003
- Posts
- 1472
HELP. Do I need soft limits set to have the CNC slow down to hard limits
Reply With QuoteSimilar Threads
-
How To Set CNC Offsets In Mach3 After Setting Your Soft Limits..
By storm2313 in forum VideosReplies: 0Last Post: 04-14-2021, 02:25 PM -
MACH3 SOFT LIMITS – Main screen soft limit button will not illuminate
By HANZC in forum Mach Software (ArtSoft software)Replies: 2Last Post: 02-14-2019, 12:46 AM -
Mach 3 - "Software Limits" Can't turn off Soft Limits
By MattWiese in forum Mach Software (ArtSoft software)Replies: 2Last Post: 10-23-2017, 05:10 PM -
Setting up Config >Homing/Limits Dialog (Motor Home/Soft Limits)
By CStevens6 in forum Mach Software (ArtSoft software)Replies: 9Last Post: 07-18-2013, 04:19 AM -
Colchester 2000 CNC soft limits
By randdprecision in forum Colchester Tornado lathesReplies: 0Last Post: 10-26-2009, 10:17 PM
Tags for this Thread
Posting Permissions
