[jeffm]

Can anyone help me clear this alarm

[servtech]

Can anyone help me clear this alarm

Fault text ?
Permanent?
Intermittent?
When did it occur?

[jeffm]

It was running fine and it went to index for the cut off tool and this is what I got

[Heavy_Metal]

Hi,

What brand turret, it's a Doosan alarm, did it throw a message for 2024.
Probably a proximity sensor.
Do you have the Electric Circuit / Ladder Diagram [Blue] Book, it contains all the alarms out there for your machine.

[jeffm]

let me see if I can attach the picture againAttachment 491348

[Heavy_Metal]

Try to do a tool index and look if the orange LED switches for one side to the other on the hydraulic solenoid (valve) for "lifting/releasing" the turret.
If it works the proximity sensor inside the turret could be the issue.

[jeffm]

I figured out that the solenoid was stuck. I just pushed the shaft with an allen wrench to free it up and now it seems to be working. Thanks for taking the time to all for your input

[Heavy_Metal]

Okay, no problem, ..... glad it's working again.