It was running fine and it went to index for the cut off tool and this is what I got
Hi,
What brand turret, it's a Doosan alarm, did it throw a message for 2024.
Probably a proximity sensor.
Do you have the Electric Circuit / Ladder Diagram [Blue] Book, it contains all the alarms out there for your machine.
let me see if I can attach the picture againAttachment 491348
Try to do a tool index and look if the orange LED switches for one side to the other on the hydraulic solenoid (valve) for "lifting/releasing" the turret.
If it works the proximity sensor inside the turret could be the issue.
I figured out that the solenoid was stuck. I just pushed the shaft with an allen wrench to free it up and now it seems to be working. Thanks for taking the time to all for your input
Okay, no problem, ..... glad it's working again.