Dear forum users! Need Help!
By Doosan Puma 230 have error:-> 2048 /THE RESET COMMAND IS USED WHILE PROGRAM IS RUNNING./ Reset key on keyboard work correct!
Thanks for help &Ansvers !
Dear forum users! Need Help!
By Doosan Puma 230 have error:-> 2048 /THE RESET COMMAND IS USED WHILE PROGRAM IS RUNNING./ Reset key on keyboard work correct!
Thanks for help &Ansvers !
At the end of the program, the reset function gets stuck and because of this the cycle start does not start.
No other plc errors, no drives error all oil level good. Restart not help.I will upload a picture later.
hello everyone, here's a picture of the error I promised
Thanks.
It's resolved.
The cycle start button was at fault.