I'm in the process of rebuilding my Milltronics Partner 1 mill using Mach4 and ESS. I'm to the point of trying to get my SZGH servo spindle motor, https://www.automationtechnologiesin...-inverter-220v , wired in, but the inputs and outputs for the driver are different than what Mach4/ESS want. The attached screenshot shows what the driver is looking for and outputting. I've emailed SZGH and am waiting to hear back from them and Arturo at CNC4PC is looking into it as well, but I figured I'd see if someone here had any experience with this?
Thanks,
Mike