Hi all,
I have a VMC with a Fanuc OM-B controll. I need to adjust the spindle orientation because it is slightly off.
As far as I know the spindle orienattion Parameter is #6577.
However my control jumps from Parameter #3199 straight to #8100.
Does anybody know how to enable the #6000 parameters or another way of setting the spindle orientation?
Results 1 to 4 of 4
Threaded View
-
04-27-2023, 10:30 AM #1
- Join Date
- Jul 2021
- Posts
- 2
Fanuc OM-B 6000 Parameters not visible / Spindle orientation
Reply With QuoteSimilar Threads
-
Fanuc 0M Spindle Orientation Error
By SceptreCNC in forum FanucReplies: 1Last Post: 11-13-2016, 07:50 AM -
Spindle orientation Fanuc OM
By kirby in forum FanucReplies: 5Last Post: 03-28-2015, 12:55 PM -
Fanuc OM-C spindle orientation parameter
By hotiron in forum FanucReplies: 4Last Post: 07-16-2014, 04:48 AM -
FANUC-6M SPINDLE ORIENTATION
By CHANDRU in forum FanucReplies: 5Last Post: 04-18-2009, 07:05 PM -
fanuc OM-D spindle orientation parameter?
By meadowtech in forum FanucReplies: 2Last Post: 02-09-2009, 06:15 PM
Tags for this Thread
Posting Permissions
