586,060 active members*
4,416 visitors online*
Register for free
Login

Thread: Four plates milled Alum.

Results 1 to 6 of 6
  1. 10-26-2007, 06:53 PM #1
    SPEEDRE
    SPEEDRE is offline Registered
    Join Date
    Jan 2004
    Posts
    668

    Four plates milled Alum.

    Hello, I need to have a quote on aluminum plates milled and drilled. There are two of each size, left and right hands, see attached for specs. I will supply the stock and return shipping. Also include turnaround time. Thank you
    This job is closed. Thank you all.
    Reply With Quote Reply With Quote
  2. 10-26-2007, 07:28 PM #2
    cdlenterprises
    cdlenterprises is offline Registered
    Join Date
    Aug 2006
    Posts
    246
    On the base end plate there are 4 holes along the bottom. What dia. are they?
    I don't know much about anything but I know a little about everything....
    Reply With Quote Reply With Quote
  3. 10-26-2007, 10:12 PM #3
    ddprecision
    ddprecision is offline Registered
    Join Date
    Apr 2005
    Posts
    86
    Hello Couple of questions for you, Stage Upgrade. Can you have a radius where the 22 deg angle meets the 2.00 wide dim. How thick is this material? It looks like there are holes coming thru the part from the side if so what dia. and how many? Base end plate You have 4 holes at the bottom of the part, What dia. are they? You want two of each part correct? Everything is +/-.005?
    Reply With Quote Reply With Quote
  4. 10-29-2007, 08:21 PM #4
    ddprecision
    ddprecision is offline Registered
    Join Date
    Apr 2005
    Posts
    86
    Bump???????
    Reply With Quote Reply With Quote
  5. 10-29-2007, 10:29 PM #5
    prototypeCNC
    prototypeCNC is offline Registered
    Join Date
    Oct 2007
    Posts
    8
    I believe he already has it filled.
    Reply With Quote Reply With Quote
  6. 10-29-2007, 11:39 PM #6
    ddprecision
    ddprecision is offline Registered
    Join Date
    Apr 2005
    Posts
    86
    Thanks, I missed his edit.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Anyone need something turned/milled (manual)
    By skmetal7 in forum Employment Opportunity
    Replies: 2
    Last Post: 08-03-2007, 05:11 PM
  2. A Few Alum Plates Needed
    By elogicca in forum Employment Opportunity
    Replies: 10
    Last Post: 05-30-2007, 10:57 PM
  3. Looking for Milled Compressor Wheels
    By AMCTony in forum Hobby Discussion
    Replies: 1
    Last Post: 05-16-2007, 01:17 PM
  4. RFQ Al plate/milled
    By roninB4 in forum Employment Opportunity
    Replies: 8
    Last Post: 09-07-2006, 07:23 PM
  5. Never milled but have a project
    By mikesativa in forum MetalWork Discussion
    Replies: 9
    Last Post: 03-22-2006, 08:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules