I just purchased a new to me 2000 Haas VF2. The top serial port is physically missing. I initially tried to upload programs through the second serial port but had no luck communicating and then come to find out Haas says only the top serial port is for file transfer. Inside the cabinet I can see a dangling ribbon cable (see pictures) and I am assuming it is supposed to go to the missing serial port PCB. Hoping to just buy a new serial PCB from Haas and plug it into that cable but the label on the cable says "RS232 video". Any insight to this problem would be greatly appreciated.
Thanks!
Thread: VF2 Serial port problems
Results 1 to 2 of 2
-
05-11-2023, 07:44 PM #1
Registered
- Join Date
- Dec 2005
- Posts
- 47
VF2 Serial port problems
-
05-12-2023, 07:02 PM #2
Member
- Join Date
- Mar 2010
- Posts
- 1852
Re: VF2 Serial port problems
I have a spare if I can find. I can send it to you. PM me. I believe they are the same so you can just hook the RS232 cable to the one that is there.
MikeTwo Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28
Reply With QuoteSimilar Threads
-
9 pin serial port to parrallel port
By erkiwi in forum DeskCNC Controller BoardReplies: 2Last Post: 11-21-2019, 07:33 AM -
serial port
By willfly4food in forum Gecko DrivesReplies: 17Last Post: 05-22-2012, 05:16 PM -
Serial port Help
By machine_nut in forum CNC Machine Related ElectronicsReplies: 3Last Post: 06-11-2009, 12:18 AM -
VF2 Haas need diagram for serial
By XYZ machine in forum DNC Problems and SolutionsReplies: 6Last Post: 10-29-2008, 05:15 AM -
serial port
By lamicron in forum Computers / Desktops / NetworkingReplies: 9Last Post: 12-18-2007, 05:42 PM
Tags for this Thread
Posting Permissions
