So, this my first build and my first post here on CNC Zone. I have 4 of these stepper motors below and I'm not sure what power supply or drivers will work best. I want to run 48v power supply. As far as drivers go do I set them to the full 4.2 amps or how much under current should I set the dip switches to for current? Does it hurt if I go over to 4.3 amp? I'm really the most lost on drivers. Any help would be appreciated, and I thank you so much.
https://www.omc-stepperonline.com/ne...c-23hs45-4204s