Quote Originally Posted by peteeng View Post
Well Disney - Seems you have two directions:
1) get something thats flat and start again....
2) print a bracket thats flat to suit the rail and round to suit the truss and screw them together.. good luck Peter
Quote Originally Posted by peteeng View Post
Well Disney - Seems you have two directions:
1) get something thats flat and start again....
2) print a bracket thats flat to suit the rail and round to suit the truss and screw them together.. good luck Peter
Peter!

At least for the linear rail, I did design and print some half moons with sockets for the rail. I think that should work for the X axis gantry. Still not sure about the SBR20 . There will be much more force on those. We will see, I don't have the rails yet.

Thanks!