[4lowie]

Hi all, not sure if this is the right place to post but here goes.... Is there a cheap or free gcode writing wizard software out there? Currently use Mach3 software and there wizards to create simple turning gcode but going away from Mach3. So, need something to generate my gcode. Don't really want to learn F360 or anything like that.

Cheers Dave

[deadlykitten]

hy i have some goddies

for specific details, let's talk in private; no worries with common stuff / kindly

[Superman]

hy i have some goddies

for specific details, let's talk in private; no worries with common stuff / kindly

Hey Kitty...
He wants to know what is out there, what others are using
.... not what you want to force him to use. With no ability to have a free decision on the offerings.

[deadlykitten]

hey super, what i generaly do, is not about forcing, but colaboration

being able to develop simple wizards, i may code a custom action way faster than testing numerous other applications

on the other side, be a bit aware of the tendency to interpret a message ... all details you added, on 'force him', or 'no ability', or 'free decision' : they are not in my reply, but maybe in your thouths only there is a lot of crazy stuff out there, be strong

[shineworld]

This is a simple and very low cost CAM with CAD possibilities which use below a powerfull CAM engine.

https://www.e-cam.it/

[BlueChip]

Hi ... not free but may be an option for you :
https://kentechinc.com/kipwaret/

... this is not a mrketing ploy and I normally don't post ... but he did ask.