I am finally getting to start this small project. The first area I would like to address is getting the ball screws I need. I plan on using Rockford ballscrews. Are there any particulars that I need to address when doing this? Any help would be appreciated. The photo attached is the actual machine I will be doing the conversion on.
Thread: Small Mill Cnc Conversion
Results 1 to 3 of 3
-
10-29-2007, 02:16 AM #1
Registered
- Join Date
- Oct 2006
- Posts
- 21
Small Mill Cnc Conversion
-
10-29-2007, 06:36 AM #2
Registered
- Join Date
- May 2006
- Posts
- 1469
Have a look at this thread. He has retrofitted the same mill except it has the horizontal spindle as well.
http://www.cnczone.com/forums/showthread.php?t=25895
-
10-29-2007, 03:05 PM #3
Registered
- Join Date
- Oct 2006
- Posts
- 21
Thanks a bunch for that link. I think it is going to help me a great deal. All I have to do now is sit down and find time to read the whole thing.
Tim Barry
www.baywatchtowers.com
[email protected]
[email protected]
Reply With QuoteSimilar Threads
-
Wanted to buy small CNC mill
By pepper in forum Benchtop MachinesReplies: 3Last Post: 03-05-2008, 04:51 PM -
small cnc mill
By Mr. Chris in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 09-18-2006, 08:32 PM -
RFQ: Small mill/lathe job
By vadimvc in forum Employment OpportunityReplies: 3Last Post: 03-14-2006, 05:10 AM -
HARBOR FREIGHT small round column mill to a square column conversion.
By motomitch1 in forum Vertical Mill, Lathe Project LogReplies: 25Last Post: 12-01-2005, 05:24 PM
Posting Permissions
