[Saedkhansari]

Dear all
The torret lock pin nit working.
I have checked the hardware and there isn't any problem from wiring or other parts.
The micro switchs works. The solenoid valve works.
There is no alarm but the pins dont latch.
It is very kind to guide us.
Thanks

[Pitre]

Dear all
The torret lock pin nit working.
I have checked the hardware and there isn't any problem from wiring or other parts.
The micro switchs works. The solenoid valve works.
There is no alarm but the pins dont latch.
It is very kind to guide us.
Thanks

hi
does the cylinder operate when the respective solenoid is activated manually? try this in EMG condition. just push the small push button on the valve to actuate it manually and see if the cylinders operate.
if yes then you signal issue if not the cylinders have bad seals. or damaged piston inside.
chk and let me know.

where in INDIA you are based. we can attend the issue if required.